+1 888 963 9028

How to Maintain a Pro2 Series 3D Printers

The key to consistent high-quality 3D printing results is performing regular maintenance to keep an industrial 3D printer in good condition. Some 3D printer parts and accessories require maintenance before each print job, and others require maintenance every few hundred working hours. However, 3D printing maintenance is generally simple and not time-consuming.

Before starting any repair or maintenance work, it is extremely important to turn the printer off and let it cool down. Remember to always wear safety gloves and glasses.

The following tables demonstrate maintenance and repair guidelines for each part of the Pro2 Series high-quality 3D printer. The tables also include specific check-points, required activities, and the required frequency for each activity.

 

 

1. Main

 

Pro2 Series Main

 

ACTIVITY    

FREQUENCY

Clean the machine internally and surroundings. Pay close attention to the bottom plate located under the platform

 

Before each print job

 

 

2. Print Head

 

Print Head

 

ACTIVITY   FREQUENCY
Check that the hotend are not loosening, if necessary, tighten the screws which secure the hotend Before each print job
Remove material remains and lumps from the hotend Before each print job
Check if the fans are working Before each print job

 

 

3. Hotend

 

Hotend

 

ACTIVITY FREQUENCY
Check the hotend and nozzle for any clogs. If there are any clogs present, remove them. After finishing one spool of material
Clean the nozzles Every 300 working hours
Make sure the screws that tighten the heater rod and thermocouple are tightened Every 300 working hours
Check that the first layer of the printing model can stick to the build surface or not During each print job

 

Check that the material feed is smooth Before each print job

 

 

4. Platform

Platform

ACTIVITY FREQUENCY
Clean the build surface with isopropyl alcohol and a rag Before each print job
Checking the build plate for any deformation Before each print job

 

5. XY Axes

XY Axes

 

ACTIVITY FREQUENCY
Check that the gantry rods are clean Before each print job
Check the drive belt tension on the X/Y axis Every 300 working hours
Check that the screws on the X/Y axis and motor pulleys are tight Every 300 working hours
Check that the print head moves freely when the motors are disabled Every 200 working hours

Whenever the extruder does not run smoothly

If the shaft makes a noise as it moves

Lubricate the X/Y axis and gantry rods Every 300 working hours

Whenever the extruder does not run smoothly

If the shaft makes a noise as it moves

 

6. Z Axis

Z Axis

 

ACTIVITY FREQUENCY
Check that the Z-Axis screw and rails are clear of material remains Before each print job
Checking if the screws and nuts are properly secured

NOTE: Due to design characteristics, the screws that secure the Z-axis screw nut cannot be fully tightened, nuts are loose by design to prevent the bed from bending.

Every 300 working hours
Lubricating the Z axis Every 400 working hours

 

 

Connect with Raise3D:

Have you had a great experience with Raise3D that you would like to share? Please contact us at inquiry@raise3d.com. We look forward to hearing from you.

For more information about Raise3D printers and services, browse our website, or schedule a demo with one of our 3D printing experts.