Please select a country or region to customize the content for your location.
+1 888 963 9028

PPA CF

A high-performance composite filament for end-use applications

Raise3D Industrial PPA CF Filament is carbon fiber reinforced composite filament material based on PPA (polyphthalamide or high-performance/high-temperature Nylon). Thanks to its high performance Nylon matrix, this composite filament has superior mechanical and thermal properties than other Nylon filaments. With well controlled dispersion and length-distribution of chopped carbon fibers (15 wt.%), the PPA CF has lower density, lower moisture absorption, high strength and rigidity, high wear and creep resistance, excellent chemical and heat resistance.  It is promising for end-use applications in automotive, aerospace, electrical and electronics (E&E) industry.

  • High rigidity and strength
  • Better thermal performance
  • Lower moisture absorption
  • Dimensional stability
  • Chemical resistance
  • High strength-to-weight ratio

 

Compatibility

Printer: Raise3D E2CF/ Raise3D RMF500

Filament: Raise3D Industrial PPA Support Filament

Raise3D Industrial PPA CF FilamentRaise3D Industrial PPA CF Filament

Order Now

Raise3D Industrial PPA CF Filament Applications

 

Applications

  • Automobile
  • Aerospace
  • Electrical and electronics (E&E) industry
  • Industrial end-use parts

Benefits

  • High Strength
  • Heat Resistance
  • High Stiffness

Raise3D Industrial PPA CF Filament Benefits

Printing Guide

Recommended Print Settings

Nozzle Temperature Icon
Nozzle temperature (°C)
290-310℃
Bed Temperature Icon
Bed temperature (°C)
65-80℃
Layer Height Icon
Layer height (mm)
0.1-0.25 mm
Printing Speed Icon
Printing speed (mm/s)
30-120 mm/s
Cooling Fan Icon
Cooling fan
OFF
Drying Temperature Icon
Drying temperature (°C)
80-100°C for 4 to 6 hours

Printing Notifications:

  • Abrasion of the brass nozzle happens frequently when printing PPA CF. Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
  • After the printing, it is recommended to anneal the model with support material in the oven at 80-100°C for 8 to 12 hours to improve mechanical property and dimensional accuracy.

For Raise3D Printer Users:

Choose the best 3D printer to start your printing journey with PPA CF. Find E2CF.

For ideaMaker Users:

The printing profile for PPA CF will be available soon on ideaMaker IO. Please download the latest version of ideaMaker.

PPA CF

Find out more in our OFP section

Raise3D OFP