Welcome to the Raise3D Hyper Speed Pro3 Series Upgrade Kit with Hyper FFF™ technology.
*This version can only work for users who have purchased the Raise3D Hyper Speed Pro3 Series Upgrade Kit with Hyper FFF™ technology. (*Note: The Hyper Speed version can only be used with the combination of corresponding hardware and software, so users will not be able to use this installation package without the Hyper Speed kit even if they have downloaded it.)
Release notes – Exclusively for the Pro3 Series (with Hyper Speed Upgrade Kit Only)
1. New Design of the Home Screen
2. A Wizard of Hyper Speed Calibration
Help users to complete calibration of hyper speed mode to prepare for printing.
3. Distinguish Labels for Hyper Speed Gcode
Display labels for the Gcode supporting hyper speed to distinguish (lightning sign, L1, L2).
4. Add the Updated Firmware of the Hotend Control Board for Accuracy
Click « Setting > Update > Local Update > Update Hotend Controller Board Firmware » to update the firmware of the hotend control board.
5. Add RaiseCloud Hyper Speed Function
Log in your RaiseCloud to view Hyper FFF™ supported Pro3 Series.
6. Add the Function of Customizing and Modifying the Temperature during the Process of Loading or Unloading Filament with Heating
Click to load or unload filament, enter the heating stage, and then you can continue to modify the temperature.
7. The Function of Automatic Upgrade of the Motion Control Board Firmware
When the RaiseTouch firmware is installed, the firmware of the motion control board will be automatically upgraded.
- Fix the problem that the Hyper FFF™ calibration module cannot be recognized
- Repair the error report of “Out of Range”
- Fix the problem that the Power Loss Recovery cannot continue after pause
- Fix the problem of abnormal temperature detection
- Fix the problem that the hotend information cannot be recognized
- Fix the problem of the nozzle offset when resuming printing after pause
- Fix the problem of the inconsistent speed before pause and after recovery
- Fix the problem that the Power Loss Recovery cannot find the file occasionally
- Fix the problem of abnormal Power Loss Recovery for the right nozzle