How Foundry Tooling Manufacturer RBP Metallurgy Uses Raise3D T450 Large-format Printer for Casting Tooling

Nov. 17, 2025

450 × 350 × 400 mm

FFF large format

600mm/s

Max printing speed

80 mm³/s

Max nozzle volumetric flow

Introduction: Using T450 large-format printer to 3d printed tooling


RBP Metallurgy introduced Raise3D Pro2 and Pro2 Plus printers into its molding workflow to produce tooling from digital designs. Based on a related application, Raise3D is evaluating whether the T450 can support one-piece production for suitable large parts.


Mexico

Tooling

Produce complex casting patterns

For foundry tooling manufacturers, producing complex casting patterns can involve extensive manual shaping, measurement and assembly before mold-making can begin. 3D printing casting patterns offers another approach: for suitable tooling, parts can be produced from a digital model and then finished and inspected for their intended use.

RBP Metallurgy (RBP), a Mexican company specializing in the development and manufacture of custom parts, introduced Raise3D Pro2 and Pro2 Plus 3D printers into its mold-making workflow in 2021. RBP reported producing a core in approximately three days with 3D printing, compared with approximately three weeks using its conventional process.

As large-format 3D printing develops, manufacturers have more opportunities to rethink how they produce large patterns. With a build volume of 450 × 350 × 400 mm, the Raise3D T450 offers a one-piece printing option for suitable parts, reducing the need to print, align and bond separate sections.

 

One-piece casting pattern 3D printed by RBP on a Raise3D T450.

Figure 1 A one-piece cast model produced using a Raise3D T450, authorized by RBP.

The Challenge: Producing Complex Foundry Tooling by Hand

Before introducing 3D printing, RBP relied on conventional casting and mold-making processes. Core production involved manual shaping, creating assembly features, machining and careful measurement. Depending on project complexity, core production could previously take from three weeks to six months.

When tooling consists of multiple sections, the team must consider not only the dimensions of each section, but also alignment, fit and how the pattern will be removed from the mold. Design changes can also require parts of the work to be repeated. Reducing repetitive manual shaping and finishing was therefore an important opportunity to improve the mold-making workflow.

Raise3D-3D-Printing-Elevates-Cost-Efficiency-of-the-Molding-Process

Figure 2. RBP’s conventional casting and pattern-making process.

From Manual Tooling to a Digital 3D Printing Workflow

As early as five years ago, RBP chose Raise3D Pro2 and Pro2 Plus FFF printers for the production of patterns. Starting from a digital design, the team could use printed thermoplastic tooling in the mold-making process rather than relying entirely on manual shaping.

RBP’s core production time fell from approximately three weeks with the conventional process to approximately three days with 3D printing. The digital workflow reduced manual shaping and provided a more flexible way to revise designs and reproduce tooling.

The Pro2 Plus’s 305 × 305 × 605 mm build volume, filament run-out detection and power-loss recovery were among the features RBP considered when choosing the Pro2 Series.

RBP-uses-Raise3D-Pro2-and-Pro2-Plus-printers-to-produce-casting-patterns

Figure 3. RBP uses Raise3D Pro2 and Pro2 Plus printers to produce casting patterns.

合照(带架子)

T450&T700

Large prints. Fast. Reliable. Affordable.

Exploring One-Piece Printing for Large Casting Patterns with the T450

Through its use of the Pro2 Series in mold-making, RBP gained experience with digital manufacturing and confidence in Raise3D equipment. As its needs expanded to larger casting patterns, the team sought to explore whether a larger build volume could allow patterns that previously required separate sections to be printed in one piece, reducing subsequent assembly work.

For large casting patterns, build volume affects not only the maximum size of a part, but also the manufacturing workflow. When a model exceeds the available build space, it must be printed in sections and then aligned, bonded and finished at the seams.

The Raise3D T450 offers a build volume of 450 × 350 × 400 mm. For suitable parts that fit within that space with their supports and necessary clearance, one-piece printing can eliminate the need to plan separate sections and bond them together, removing bond lines and their associated assembly misalignment risks. Support removal, surface finishing and dimensional inspection may still be required.

Moving from multiple sections to a single print changes more than the size of the part: it changes the path from a digital model to usable tooling.

A casting pattern produced by RBP

Figure 4. A casting pattern produced by RBP.

T Series: Efficiency and Stability for Large-Format Printing

Designed for large patterns and tooling, the Raise3D T Series combines a large build volume, high-flow extrusion, motion control and temperature management to support large-part printing.

The Raise3D T series includes the T450 and T700. The T450 has a build volume of 450 × 350 × 400 mm, while the T700 has a build volume of 700 × 500 × 1,000 mm.For companies producing larger patterns or tooling, the T700 offers more space to explore one-piece production. Printer selection should account for part dimensions, orientation, supports and process requirements.

Raise3D T450 and T700

Figure 5. The Raise3D T Series: T450 build volume of 450 × 350 × 400 mm and T700 build volume of 700 × 500 × 1,000 mm.

TwinFlow™: Two Filament Paths, One Nozzle

TwinFlow™ uses two independent filament paths and a single output nozzle. The two paths feed into the hotend and extrude through the same nozzle.

In high-flow mode, two strands of the same filament are fed and extruded together. The T Series reaches print speeds of up to 600 mm/s under specific test conditions. Under specified test conditions, the T450’s maximum nozzle volumetric flow reaches 80 mm³/s.¹

In dual-material mode, two different materials are extruded in sequence, enabling water-soluble or easily removable supports, as well as dual-color printing and other functions.

¹ The reference test conditions for the T450’s maximum TwinFlow™ volumetric flow of 80 mm³/s are Raise3D Hyper Speed ABS V2 filament, a 0.4 mm nozzle and a nozzle temperature of 250°C, printing a single-layer, thin-walled, smooth structure. Actual performance depends on the model, material, nozzle and print settings.

 

Figure 6. TwinFlow™ operating modes: high-flow mode (left) and dual-material mode (right).

Motion and Temperature Management for Large Parts

The T450 uses a 4 Motor Drive (4MD) CoreXY motion system designed for large-area movement and long print jobs. Extrusion pressure control adjusts output during acceleration, deceleration and cornering, helping reduce material buildup at corners and uneven extrusion for more consistent print lines.

Temperature management is also important for larger parts. The T450 has an actively heated chamber reaching up to 70°C and a maximum nozzle temperature of 420°C. A more stable chamber environment can help reduce the risk of warping and layer separation when printing large parts with suitable materials.

4 Motor Drive (4MD) CoreXY motion system designed for large-area movemen

Figure 7. 4MD CoreXY is designed for large-area movement.

Beyond Print Speed: The Complete Workflow

The T Series also provides monitoring and operating support for long prints, including filament run-out detection and live camera monitoring. Specific features depend on the model, configuration and firmware version.

When assessing manufacturing efficiency, print time is only one part of the picture. Data preparation, support removal, alignment, bonding, surface finishing and inspection also matter. For parts suitable for one-piece printing, reducing assembly steps can simplify the path from a completed print to usable tooling.

Figure 8. A RBP pattern produced using the Raise3D T450.

What Should Manufacturers Check When Evaluating 3D Printed Foundry Tooling?

A larger build volume offers more options, but not every design is suitable for one-piece printing. Before selecting a process, consider:

  • Part function: Is the printed item a pattern, core box, mold or another type of tooling? What role does it play in the casting process?
  • Geometry and orientation: Can the complete model, supports and necessary clearance fit within the printer’s effective build volume?
  • Material and operating environment: Does the material meet strength, wear and temperature requirements, and is it compatible with the molding process?
  • Surface and dimensions: Establish finishing requirements, measurement methods and acceptance criteria before comparing options.
  • Total workload: Include design preparation, print time, material, labor, post-processing and inspection.

A printed thermoplastic pattern is not the same as a directly printed sand mold or sand core. Each approach has its own process and application requirements.

A RBP casting pattern produced by Raise3D printer.

Figure 9. A RBP casting pattern produced by Raise3D printer.

From Digital Mold-Making to Large One-Piece Parts

RBP Metallurgy introduced 3D printing into its mold-making process, reducing manual shaping and shortening core production time. As demand for larger patterns and tooling grows, the Raise3D T Series offers manufacturers options for further workflow improvements. The T450’s build volume supports one-piece printing for suitable parts, while the T700 provides more space for larger applications. Combined with high-flow extrusion, motion control and temperature management, these systems give manufacturers ways to explore more efficient and flexible digital workflows around their specific parts.

 

Frequently Asked Questions

What is 3D printing for casting patterns?

It is the use of additive manufacturing to produce patterns for a casting process. Suitability depends on the pattern’s purpose, material, surface finish, dimensional requirements and the foundry’s acceptance criteria.

Which Raise3D printers has RBP Metallurgy used?

RBP Metallurgy has used Raise3D Pro2, Pro2 Plus and T450 FFF 3D printers to produce mold-making tooling.

Why consider printing a large pattern in one piece?

When the model, supports and necessary clearance fit within the build volume, one-piece printing can eliminate the need to split and bond that part. It does not eliminate finishing or inspection, and the actual benefit should be compared with the existing workflow.

How should the efficiency of one-piece printing be assessed?

Compare the complete workflow for the same part and production requirements: data preparation, printing, assembly, surface finishing and inspection. Results vary with part geometry, material, print settings and acceptance criteria.

 

Discuss Your Casting Pattern Application

If your team is evaluating casting patterns or other manufacturing tooling, share your part dimensions, target process, material requirements and acceptance criteria with Raise3D. Together, you can assess whether a large-format 3D printing workflow is suitable for your application.

Get a Demo

Get a live Demo on 3D Printers, ideaMaker, RaiseCloud, OFP and more.

Connect with Raise3D

Do you have a great 3D printing success story and think it would be cool to be featured on our website? We would love to learn more! Write to us at inquiry@raise3d.com

For more information about Raise3D printers and services, browse our website, or schedule a demo with one of our 3D printing experts.

3D Printing Applications