Raise3D High Clear Resin 1kg
Benefits
- High success rate
- High precision
- Clear presentation of details
- Different degrees of transparency for flexible use
Applications
- Transparent prototype production, such as optical device housing, display models, etc.
- Liquid flow analysis, internal flow channels, etc.
- Precision components manufacturing, transparent protective covers, small mechanical components, and complex assembly parts.
- Prototype development of consumer goods, the fields of consumer electronics or household items, etc.
Material Properties*
*All test specimens were printed with Raise3D DF2 printer (100 μm thickness, 5.5s) and cured with DF Cure for 5 minutes per side at room temperature.
See more details in Technical Data Sheet.
| Testing Method | Green | Post-Cured | |
| Tensile Strength | ASTM D638 | 28 MPa | 44 MPa |
| Young’s Modulus | ASTM D638 | 1410 MPa | 2092 MPa |
| Elongation at Break | ASTM D638 | 31% | 14.5% |
| Flexural Strength | ASTM D790 | 34 MPa | 72 MPa |
| Flexural Modulus | ASTM D790 | 733 MPa | 1798 MPa |
| Notched Izod | ASTM D256 | 48 J/m | 49 J/m |
| Heat Deflection Temp.@0.45 MPa | ASTM D648 | N/A | 51.6°C |
Cleaning
High Clear V1 Resin requires cleaning to achieve the ideal properties of the printed part.
There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.
For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.
Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash.
| Wash Time | Wash Drying Time | |
| Recommended washing parameters | 5 min | 10 min |
Post-curing
After cleaning, High Clear V1 parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.
Setting 1: For prototyping or display purpose (default parameters in ideaMaker).
| UV Curing Time | Heat Curing Time | Heat Curing Temperature | |
| Setting 1 | 10 min | 0 min | N/A |
*To learn about how to improve the transparency of the parts, please click here.