Raise3D Standard Black Resin 1kg
Benefits
- High precision
- Smooth surface
- Strong details
- Easy to print
- Excellent mechanical properties
Applications
- Presentation and assembly of prototypes
- Micro-feature and complex detail models
- Film and artistic props
- Jigs and fixtures
- Small batch production
Material Properties*
*All test specimens were printed with Raise3D DF2 printer (2.3 mW/cm2 at 405 nm, 50 μm thickness, 3s) and cured with DF Cure for 15 minutes per side at room temperature.
See more details in Technical Data Sheet.
| Testing Method | Green | Post-Cured | |
| Tensile Strength | ASTM D638 | 20.46 MPa | 26.51 MPa |
| Young’s Modulus | ASTM D638 | 2098 MPa | 2658.97 MPa |
| Elongation at Break | ASTM D638 | 18.29% | 11.63% |
| Flexural Strength | ASTM D790 | 49.03 MPa | 74.98 MPa |
| Flexural Modulus | ASTM D790 | 1767.56 MPa | 2518.42 MPa |
| Notched Izod | ASTM D256 | 29.53 J/m | 43.24 J/m |
| Heat Deflection Temp.@0.45 MPa | ASTM D648 | 49.1°C | 66.9°C |
Cleaning
The Standard Black Resin needs to be cleaned to obtain the desired surface effect. There is no need to remove the support structure from the print before cleaning, the print should be cleaned before post-curing until the surface is free of any solvent residue. For special structures or detailed parts, such as small holes, it is recommended to clean them manually, and then use compressed air or nitrogen to dry the residual solvent on the surface, or place the printed parts at room temperature for a short time to dry until there is no solvent residue on the surface before post-curing.
* Refer to the table to the right for recommend cleaning parameters for Raise3D DF Wash.
| Wash Time | Wash Drying Time | |
| Recommended washing parameters | 5 min | 10 min |
Post-curing
After cleaning, general purpose black resin parts need to be post-cured to achieve optimal performance. Refer to Raise3D DF Cure Post-Cure Parameters in the table to the right.
| UV Curing Time | Heat Curing Time | Heat Curing Temperature | |
| Setting 1 | 30 min | 30 min | 60°C |