Raise3D Hyper Speed ABS Filament 2.5 kg
Color:
Raise3D Hyper Speed ABS Filament 2.5 kg: Black (Black 6 C/ RAL 7021), Grey (429U/ RAL 7045)
Specifications: 1.75 mm/ 2.5 kg
Hyper Speed ABS filament is specifically designed to be used with the Hyper FFF® solution from the Hyper Speed filament line. When printing at high speeds, the regular ABS filament is rapidly fed into the heat block, and the polymer has very little time to go from a solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers. Additionally, the regular ABS filament can be subject to warpage and delamination of the printed part during high-speed printing without a heated chamber.
With optimized molecular weight and stiffness, Hyper Speed ABS filament is capable of printing at the speed of up to 300 mm/s thanks to its faster melting and homogenous cooling, which results in a lower temperature gradient and lower inner stress of printed part. Hyper Speed ABS filament exhibits superior heat resistance compared to Hyper Speed ABS filament. With almost no warpage and improved interlayer bonding, Hyper Speed ABS filament is also perfectly suitable for many functional prototyping parts, tools and fittings with many different possibilities for post-processing and finishing methods (e.g., polishing and acetone vapor smoothing).
2.5 kg filament allows for uninterrupted batch printing and continuous printing for large models. It is provided inside a sealed dry storage bag, and the filament outlet and shaft ensure the printer smoothly loads the filament while also keeping the filament dry.
Users can install the 2.5 kg filament directly inside the Raise3D RMF500 filaments cartridges. For instructions on how to unpack and load this filament, please refer to the How to Unpack the 2.5 kg Filament Bag Manual.
Benefits of 2.5 kg Filament:
- Uninterrupted long-term batch printing
- Continuous printing for large models
- Simplified operation with less filament change
- Filament bag keeps the filament dry
*Please use the latest ideaMaker Version 4.4.3 Alpha for Hyper Speed ABS filament.
