Specifications: 1.75mm / 0.5kg
NylonX is an amazing, reinforced nylon filament. By adding micro-carbon fibers to nylon, you get a tough filament capable of printing parts with stiffness, impact resistance, and high tensile strength. NylonX is an engineering grade filament, ready for hobbyists and advanced users alike, which gives you the durability of nylon combined with the stiffness of carbon fiber.
Like all nylons, NylonX must be kept dry! If it does not remain packaged with desiccant, it will readily absorb moisture from the air; this will lead to degraded print quality and wasted filament. You can dry it out by baking it in an oven at 180°F for 4-6 hours. We also carry the PrintDry Filament Drying System for more precise dehydration for all filament types.
For more information about printing with NylonX, read our How To Succeed with NylonX article.
Print temperature: 250-265°C
Print speed: 25mm/s – 35mm/s
Bed temperature: 60-65°C with PVA glue stick
Nozzle: Stainless Steel, Olsson Ruby, or other hardened nozzle types
For delivery of the USA, expedited delivery availability (additional cost may apply), or additional questions, please contact email@example.com or 1-888-963-9028.
The shown price excludes tax, which will be calculated during check out.