fbpx

Pro2

$ 3,999.00
€ 3,499.00 Excl. VAT

Competitive and scalable; the Pro2 3D printer improves upon its award-winning predecessor and provides the next generation of performance.

Electronic Driven, Dual Extrusion with Retracting Hot Ends; 4× Increased torque performance
Massive Build Volume (12×12×11.8 inch / 305×305×300 mm)
0.01 mm Layer Height
Camera / HEPA Air Filtration

Diverse Filament Compatibility (Up to 300℃)
32 Bit Motion Control Board
7-inch Touch Screen
Resume Print after Power Loss or Filament Outage
Wireless Compatibility

 

Prices may vary by region.

Customers outside of the US, please contact a local Raise3D distributor or reseller to get a quote or tech support.

1-Year Limited Warranty Terms

Want to purchase with Raise Shield?  Please contact Raise3D at 888 963 9028 or sales@raise3d.com.

1-Year RaiseShield: Full warranty coverage of electrical and mechanical components of Raise3D Pro2 Series printers for 1 year, consumables and cosmetic imperfection not included.

2-Year RaiseShield: Full warranty coverage of electrical and mechanical components of Raise3D Pro2 Series printers for 2 year, consumables and cosmetic imperfection not included.

3-Year RaiseShield: Full warranty coverage of electrical and mechanical components of Raise3D Pro2 Series printers for 3 year, consumables and cosmetic imperfection not included.

 

Competitive and scalable; the Pro2 3D printer improves upon it’s award winning predecessor and provides the next generation of performance.

Electronic Driven, Dual Extrusion with Retracting Hot Ends; 4× Increased torque performance
Massive Build Volume (12×12×11.8 inch / 305×305×300 mm)
0.01 mm Layer Height
Camera / HEPA Air Filtration

Diverse Filament Compatibility (Up to 300℃)
32 Bit Motion Control Board
7-inch Touch Screen
Resume Print after Power Loss or Filament Outage
Wireless Compatibility

 

Free ground freight shipping within continental United States.
For delivery outside of the Continental United States, expedited delivery availability (additional cost may apply), or additional questions, please contact sales@raise3d.com or 1-888-963-9028.
The shown price excludes tax, which will be calculated during check out.

1-Year Limited Warranty Terms

Electronic Driven Dual Extrusion with Retracting Hot Ends

Prints complex mechanical parts, supports a variety of multi-material filaments and improves print speed.

  • High repeatability (<0.005mm, 5 micron)
  • Lightning speed (<1 second switching time)
  • 1.5mm lifting distance, compatible with flexible filaments
  • High reliability (tested >100,000 times)

Big Build Volume

Single: 12×12×11.8 inch (305×305×300 mm)
Dual: 11×12×11.8 inch (280×305×300 mm)

  • 24/7 Reliability
  • Multiple fail safe systems
  • Industrial grade components

High Resolution

Unique motion system for superior part quality and resolution

  • Interchangeable nozzles: 0.2 mm nozzle for finer X/Y detail
  • Precise positioning: 0.78125 micron positioning resolution on X/Y axis
  • Unmatched layer resolution: 0.01 mm layer thickness

Capable of Printing a Variety of Filaments Up to 300℃

PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill

 

Intuitive User Experience

7-inch Touch Screen

Visual interface / Rapid reviewing / Visual print progress / Full adjustment control

 

Second Generation Power Loss Resuming

Never lose a print.

“I actually knocked off the power accidentally when I hit the cord when I was vacuuming, I was currently doing a 96 hours print with only 2 hrs left. As I raised my head to scream in terror, I turned back on the machine and it asked me if I wanted to continue print…THIS WAS A LIFESAVER”

-Shon Robinson

New Extruder with Filament Run-out Sensor

Effortless, Dependable and Accurate with optical run-out sensors and end stops
Better grip: Dual gear driven
No slipping: 4× increased torque performance
Worry free prints: Optical run-out sensor

Next Generation Motion Controller

Best in class reliability / Precise voltage control / Silky smooth movement / Superior thermal performance
  • 400MHz ARM Cortex-M7 32bit RISC FPU
  • Industrial grade components
  • Stand-alone motor driver
  • 256 micro-steps driver system

Remote User Interface

Access / Monitor / Control

Operate efficiently with ideaMaker by connecting wirelessly to your Pro2 Series Printer

HEPA Air Filtration

Environmentally friendly

Designed to silently remove nano-particles

Build Plate System

Excellent warping prevention / Even heat distribution / Longer lifetime / Easy to remove

  • Aerospace grade material
  • High temperature silicone heating bed
  • Magnetically-held aluminium bed
  • Improved 4+9 points lock system

Technical Specifications

General

Print Technology: FFF
Build Volume (W×D×H):
– Single Extrusion Print: 12×12×11.8 in / 305×305×300 mm
– Dual Extrusion Print: 11×12×11.8 in / 280×305×300 mm
Machine Size (W×D×H): 24.4×23.2×29.9 in / 620×590×760 mm

Print Head: Dual-head with electronic lifting system
Filament Diameter: 1.75mm
XYZ Step Size: 0.78125, 0.78125, 0.078125 micron
Print Head Travel Speed: 30-150 mm/s

Build Plate: Heated aluminum build plate with magnetic holding
Max Build Plate Temperature: 110 ºC
Heated Bed Material: Silicone
Build Plate Leveling: Pre-calibrated leveling
Supported Materials:
PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill
Nozzle Diameter: 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
Max Nozzle Temperature: 300 ºC

Connectivity: Wi-Fi, LAN, USB port, Live camera
Noise Emission (Acoustic): <50 dB(A) when building
Operating Ambient Temperature: 15-30 ºC, 10-90% RH non-condensing
Storage Temperature: -25℃ to +55℃, 10-90% RH non-condensing
Technical Certifications: CB, CE, FCC, RoHS

Electrical

Power Supply Input: 100-240V AC, 50/60Hz 230V @3.3A
Power Supply Output: 24V DC, 600 W

Software

Slicing Software: ideaMaker
Supported File Types: STL/ OBJ/ 3MF
Supported OS: WINDOWS/ macOS/ LINUX
Machine Code Type: GCODE

Printer Controller

User Interface: 7-inch Touch Screen
Network: Wi-Fi, Ethernet
Resume Print after Power Outage: Firmware recording, no need for battery installation. Protection from any condition
Screen Resolution: 1024*600
Motion Controller: ARM Cortex M7.400MHZ FPU
Logic Controller: Freescale i.MX6, Quad core 1Ghz ARM processor
Memory: 1GB
Onboard Flash: 8GB
OS: Embedded Linux
Ports: USB 2.0*2, Ethernet*1

NEW Pro2 SERIES

Features and benefits video