+1 888 963 9028

PET Support 

A cost effective break-away support material designed for composite filaments.

Raise3D Industrial PET Support Filament is a break-away support material specially designed for FFF printing with fiber reinforced filaments. In contrast to printing supports using the same material, PET support filament is easier to remove and allows for detailed surface quality and dimensional accuracy. Compared to water soluble support materials, the lower moisture absorption and the performance-cost ratio of PET support both make it an ideal alternative to BVOH or PVA.

  • Cost effective
  • Easy and fast removal with tools
  • No special post-processing required
  • Broad compatibility with other printing filaments

 

Compatibility

Printer: Raise3D E2CF/ Raise3D RMF500

Filament: Raise3D Industrial PET CF Filament/ Raise3D Industrial PET GF Filament/ Other Fiber Reinforced Filaments

It is recommended to use hardening steel nozzle and above grade nozzles.

Raise3D Industrial PET Support FilamentRaise3D Industrial PET Support Filament

Raise3D Industrial PET Support Filament Applications

 

Applications

  • Support material for PET CF& PET GF
  • For large overhangs and cavities
  • Easy to remove
  • Smooth and clean support interface

Benefits

  • Easy Break-away
  • Easy to Print
  • High Performance-cost Ratio

PET Support Filament Benefits

Printing Guide


Recommended Print Settings

Nozzle Temperature Icon
Nozzle temperature (°C)
260℃-300℃
Bed Temperature Icon
Bed temperature (°C)
60-80℃
Layer Height Icon
Layer height (mm)
0.1-0.25 mm
Printing Speed Icon
Printing speed (mm/s)
35-120 mm/s
Cooling Fan Icon
Cooling fan
ON
Drying Temperature Icon
Drying temperature (°C)
70-80℃ for 8-12 hours

Printing Notifications:

  • It is recommended to use a hardened steel nozzle, tungsten steel, or ruby nozzle to avoid nozzle abrasion.
  • Dry PET Support at 70-80°C for 8-12 hours before printing, as low moisture content is crucial for final printed part quality.
  • PET Support is sensitive to moisture and should be stored and used under dry conditions (Surrounding humidity below 15%).

For Raise3D Printer Users:

Choose the best 3D printer to start your printing journey with PET Support. Find E2CF.


For ideaMaker Users:

The printing profile for PET Support will be available soon on ideaMaker IO. Please download the latest version of  ideaMaker.


PET Support

Find out more in our OFP section