+1 888 963 9028

PPA Support 

A break-away support material designed for the composite filaments based on PPA.

Raise3D Industrial PPA (Polyphthalamide)Support Filament is a break-away support material specially developed for PPA (Polyphthalamide). During 3D printing process, it creates a stable support structure, provides proper adhesion to interface with printed parts, and counteract with the warpage tendency, therefore it improves the surface quality for overhangs and cavities of the printed parts significantly; After a print is finished, the support structure can be easily removed (break-away) by hands or tools from the printed parts. This support material is more cost-effective comparing with water-soluble support material.

  • Cost effective
  • Easy to remove and break-away
  • No special treatments

 

Compatibility

Printer: Raise3D E2CF/ Raise3D RMF500

Filament: Raise3D Industrial PPA CF Filament/ Raise3D Industrial PPA GF Filament

It is recommended to use hardening steel nozzle and above grade nozzles.

Raise3D Industrial PPA Support FilamentRaise3D Industrial PPA Support Filament

Raise3D Industrial PPA Support Filament Applications

 

Applications

  • Support material for Raise3D Industrial PPA CF and PPA GF Filament.

Benefits

  • Easy Break-away
  • Easy to Print
  • High Performance-cost Ratio

PPA Support Filament Benefits

Printing Guide


Recommended Print Settings

Nozzle Temperature Icon
Nozzle temperature (°C)
280℃-290℃
Bed Temperature Icon
Bed temperature (°C)
60-80℃
Layer Height Icon
Layer height (mm)
0.1-0.25 mm (0.4mm nozzle)
Printing Speed Icon
Printing speed (mm/s)
30-90 mm/s
Cooling Fan Icon
Cooling fan
OFF
Drying Temperature Icon
Drying temperature (°C)
80-100℃ for 4-6 hours

Printing Notifications:

  • It is recommended to use hardening steel nozzle and above grade nozzles.
  • Raise3D Industrial PPA Support Filament is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 15%).

For Raise3D Printer Users:

Choose the best 3D printer to start your printing journey with PPA Support. Find E2CF.


For ideaMaker Users:

The printing profile for PPA Support will be available soon on ideaMaker IO. Please download the latest version of ideaMaker.


PPA Support

Find out more in our OFP section