+1 888 963 9028


An ideal choice to experience a reliable carbon fiber composite printing for strong and cost-effective end-use applications

Raise3D Industrial PET CF is a carbon fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed 15wt% carbon fibers enhance the rigidity, strength, heat and chemical resistance of the PET matrix. After annealing, PET CF stabilizes its heat resistance at around 150ºC and tensile modulus and strength of over 6 GPa and 80 MPa respectively. Compared to carbon fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance and low moisture absorption makes PET CF an ideal choice for reliable carbon fiber composite printing for strong and cost-effective end-use applications, such as jigs. fixtures, functional parts.

  • HDT up to 150℃
  • Strong and high stiffness
  • High dimensional stability
  • Low moisture absorption
  • Creep and chemical resistance




1 kg Filament: Raise3D E2CF/ Raise3D RMF500

2.5 kg Filament: Raise3D RMF500

Filament: Raise3D Industrial PET Support Filament

Raise3D Industrial PET CF FilamentRaise3D Industrial PET CF Filament (1 kg)

Raise3D Industrial PET CF Filament (2.5 kg)

*For demonstration purposes only. Raise3D Industrial PET CF Filament (2.5 kg) was designed to be used while inside the sealed bag, so please do not unseal it.



  • Automobile
  • Aerospace
  • End-use part
  • Jigs & Fixtures
  • Manufacture aids
  • Electrical and electronics (E&E) industry


  • High Strength
  • Heat Resistance
  • Low Moisture Absorption

Benefits of 2.5 kg Filament

  • Uninterrupted long-term batch printing
  • Continuous printing for large models
  • Simplified operation with less filament change
  • Filament bag keeps the filament dry

Raise3D Industrial PET CF Filament Benefits

Printing Guide

Recommended Print Settings

Nozzle Temperature Icon
Nozzle temperature (°C)
Bed Temperature Icon
Bed temperature (°C)
Layer Height Icon
Layer height (mm)
0.1-0.25 mm
Printing Speed Icon
Printing speed (mm/s)
35-90 mm/s
Cooling Fan Icon
Cooling fan
Drying Temperature Icon
Drying temperature (°C)
70-80°C for 8 to 12 hours

Printing Notifications:

  • Dry PET CF at 70-80°C for 8-12 hours before printing, as low moisture content is crucial for final printed part quality.
  • After drying, we recommend storing PET CF filaments inside Raise3D Filament Dry Box during the printing process.
  • Abrasion of the brass nozzle happens frequently when printing PET CF. Using an abrasion-resistant nozzle, such as hardened steel or a ruby nozzle, is highly recommended.
  • After printing, it is recommended to anneal the model in an oven at 80-100°C for 8-12 hours.
  • For a small size model (side length < 50 mm), annealing at 80°C for 8 hours is recommended; For a medium-size model (50 mm < side length < 150 mm), annealing at 80°C for 12 hours is recommended; For a large size model, 100°C for at least 12 hours is recommended.
  • If PET CF is also used as the support material, please remove the support structure after annealing.

For Raise3D Printer Users:

Choose the best 3D printer to start your printing journey with PET CF. Find E2CF, RMF500.

For ideaMaker Users:

The printing profile for PET CF will be available soon on ideaMaker IO. Please download the latest version of ideaMaker.


Find out more in our OFP section