• We're attending WORLD PM2024 in Japan! Please drop us a visit. Discover More
+1 888 963 9028

PET GF

An ideal choice with multi-colour for reliable printing of fibreglass composites for strong and cost-effective end-use applications.

Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs & fixture and functional parts. In addition, PET GF provides multiple color choices.

  • Low moisture absorption
  • High dimensional stability
  • Heat and chemical resistance
  • Creep resistance
  • Multiple colors

 

Compatibility

Printer: Raise3D Pro3 HS Series/ Raise3D E2CF/ Raise3D RMF500

Filament: Raise3D Industrial PET Support Filament

Raise3D Industrial PET GF FilamentRaise3D Industrial PET GF Filament

Raise3D Industrial PET GF Filament Applications

 

Applications

  • Automobile
  • End-use parts
  • Jigs & Fixtures
  • Manufacture tools
  • Electrical and electronics (E&E) industry

Benefits

  • High Strength
  • Low Moisture Absorption
  • High Performance-cost Ratio

Raise3D Industrial PET GF Filament Benefits

Printing Guide


Recommended Print Settings

Nozzle Temperature Icon
Nozzle temperature (°C)
280-300℃
Bed Temperature Icon
Bed temperature (°C)
80-100℃
Layer Height Icon
Layer height (mm)
0.1-0.25 mm
Printing Speed Icon
Printing speed (mm/s)
35-90 mm/s
Cooling Fan Icon
Cooling fan
ON
Drying Temperature Icon
Drying temperature (°C)
70-80°C for 8 to 12 hours

Printing Notifications:

  • Dry PET GF at 70-80°C for 8-12 hours before printing, as low moisture content is crucial for final printed part quality.
  • After drying, we recommend storing PET GF filaments inside Raise3D Filament Dry Box during the printing process.
  • Abrasion of the brass nozzle happens frequently when printing PET GF. Using an abrasion-resistant nozzle, such as hardened steel or a ruby nozzle, is highly recommended.
  • After printing, it is recommended to anneal the printed model in an oven at 80-100°C for 8-12 hours.
  • For a small size model (side length < 50 mm), annealing at 80℃ for 8 hours is recommended; For a medium-size model (50 mm < side length < 150 mm), annealing at 80℃ for 12 hours is recommended; For a large size model, 100°C for at least 12 hours is recommended.
  • After annealing, a maximum of 0.1 % dimensional shrinkage could be observed along the Z-axis, depending on infill and layer height, and no significant dimensional shrinkage along the XY-axes.
  • If PET GF is also used as the support material, please remove the support structure after annealing.

For Raise3D Printer Users:

Choose the best 3D printer to start your printing journey with PET GF. Find E2CF.


For ideaMaker Users:

The printing profile for PET GF will be available soon on ideaMaker IO. Please download the latest version of  ideaMaker.


PET GF

Find out more in our OFP section