+1 888 963 9028

Standard Resin

Fast iteration for general purpose prototyping

Standard Resin is an easy-to-print well-rounded resin which provides fine detail, high accuracy and a matte smooth surface finish for an easier and more efficient post-processing process.

Standard White Resin is chosen as neutral undertones, making a perfect base for painting and other post-processing. Excellent print quality and ease of use make it ideal for general purpose prototyping, as well as presentation-ready models for art, design and industrial applications.

Raise3D Standard White Resin 1kg

Order Now

Benefits

  • Easy-to-print with high accuracy
  • Smooth and precise details
  • Matte surface finish

Applications

  • Prototyping and design
  • Models with small features and intricate details
  • Model for painting and other post-processing

Material Properties*

*All test specimens were printed with Raise3D DF2 printer (2 mW/cm2 at 405 nm, 50 μm thickness, 3s) and cured with DF Cure for 30 minutes per side at room temperature.
See more details in Technical Data Sheet.

Testing Method Green Post-Cured
Tensile Strength ASTM D638 39 MPa 67 MPa
Young’s Modulus ASTM D638 1663 MPa 2844 MPa
Elongation at Break ASTM D638 30% 19%
Flexural Strength ASTM D790 51 MPa 108 MPa
Flexural Modulus ASTM D790 1318 MPa 2830 MPa
Notched Izod ASTM D256 33 J/m 33 J/m
Heat Deflection Temp.@0.45 MPa ASTM D648 N/A 77°C

 

Printing Settings

It is recommended to use the default printing profiles available in ideaMaker.

After printing, it’s recommended to not leave a successful but unwashed model in the printer for too long. This will prevent the model from over-swelling, which may cause dimensional deviations or support softening.

For more printing information, please read Raise3D DF2 3D Printer User Manual.

Download the Speed Template (0.1 mm) for Standard White Resin here. To learn about how to import the template into ideaMaker, visit here.

Cleaning

Standard White V1 Resin requires cleaning to achieve the ideal properties of the printed part.

There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.

For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.

Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash.

Wash Time
 Wash Drying Time
Recommended washing parameters
 10 min 10 min

 

Post-curing*

After cleaning, Standard White V1 parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.

Setting 1: For prototyping or light functional use.

Setting 2: For functional use with a faster curing process (default parameters in ideaMaker).

Setting 3: To achieve the best resin properties, as indicated in the TDS. Please note, following these parameters will make the surface become yellowish, and it will take more than 1 month to change back to white.

UV Curing Time
 Heat Curing Time
 Heat Curing Temperature
Setting 1
 5 min 5 min 60℃
Setting 2
 30 min 30 min 60℃
Setting 3
 60 min 0 min N/A

*To learn more about how to prevent Raise3D Standard White Resin from being yellowish after post-curing, please visit here.

Download Product Documents

Standard Resin

Learn more about Raise3D resins

Learn More